Restaurant Software Guides

Compare software, understand costs, and plan your next step.

POS hardware

POS hardware

USB or printer-driven cash drawer: what should you buy?

A cash drawer can connect directly to a POS terminal or open through a receipt printer. Use this checklist to identify the right connection path, confirm compatibility, and plan a safe test before buying.

Read →
POS hardware

How to Choose a Receipt Printer for Your POS Terminal

A receipt printer needs more than the right cable. Check your POS device, supported models, connection, paper and recovery process before buying. This guide includes a practical acceptance worksheet and a safe way to practice common failures.

Read →
POS hardware

How many POS terminals does a restaurant need, and where should they go?

The right terminal count depends on where staff need to enter orders and take payments at the same time. Map their routes, measure peak demand, and test a proposed layout before committing to hardware.

Read →
POS hardware

How to Evaluate a Network Receipt Printer for a Restaurant POS

A shared receipt printer needs more than a network connection. Learn how to map the devices, check discovery at the intended station, test an interruption safely, and decide who owns each support step.

Read →
POS hardware

How to Plan Handheld POS Batteries for a Long Shift

A handheld POS needs enough charge for setup, service, and close—not just the dinner rush. Use a coverage schedule to decide how many devices to charge, when to rotate them, and where to keep a ready spare.

Read →
POS hardware

What to Ask About POS Hardware Replacement and Support

A POS hardware warranty matters most when a device fails during service. Use these questions to compare coverage, replacement logistics, backup plans, and the work needed to get a new terminal ready.

Read →
POS hardware

How to Check POS Tablet Operating System Support

A tablet update can affect more than the screen at your counter. Use a device compatibility register, written vendor answers, and a controlled practice check to decide when to update or replace your POS hardware.

Read →
POS hardware

How to Test Wi-Fi Coverage for Restaurant POS Devices

A strong signal at the counter does not prove a handheld will work at every table. Use a service-area map, repeatable device checks, and a controlled pilot to find weak spots before choosing equipment.

Read →
POS hardware

How to Plan Power Protection for Restaurant POS Hardware

A POS with offline software still needs powered hardware. Map the devices needed to take and route an order, estimate backup runtime, and prepare staff to recover safely after a short outage.

Read →
POS hardware

Should a Restaurant Connect a POS Printer by Cable or Network?

A printer beside one register may need a different connection than a kitchen printer shared by several terminals. Map the route, confirm device support, and assign someone to handle failures before choosing a setup.

Read →
POS hardware

How Many Spare POS Devices Should a Restaurant Keep?

A spare POS device is worth considering when its failure would stop a critical service task and a replacement would take too long. Use this worksheet to compare practical backups, supplier lead times, and the cost of keeping equipment ready.

Read →
POS hardware

Restaurant POS Ethernet vs. Wi-Fi: Choose a Connection for Each Station

Fixed POS terminals and mobile devices have different connection needs. Use a station-by-station worksheet to compare Ethernet and Wi-Fi, clarify what happens during an outage, and give your team a workable fallback.

Read →

Older articles for diners